NETGEAR M4200 Software Administration Manual page 617

20. Make sure that in the Status column, the field for the DHCP server states Running.
If a computer in the network must receive an IP address in the marketing scope or sales
scope, the computer must include a static IP address configuration with the IP address,
subnet mask, and gateway address of the gateway that is used for the marketing scope or
sales scope.

To enable a computer with a Windows operating system to receive an IP address from
the gateway for the marketing scope or sales scope, do the following:
1. Navigate to the properties of the network interface card.
2. Open the Internet Protocol Version 4 (TCP/IPv4) Properties pop-up window.
3. Select the Use the following IP address radio button.
4. Configure the IP address, subnet mask, and gateway address for the marketing or sales
scope.
Managed Switches
DHCP L2 Relay and L3 Relay
617