A screen similar to the following displays.
b. Under MVR Interface Configuration, scroll down and select the Interface 0/9 check
box.
c. Enter the following information:
•
In the Admin Mode list, select Enable.
•
In the Type list, select source.
d. Click Apply to save the settings.
6.
After port 1 receives an IGMP report for multicast group 224.1.2.3, it is added into MVR
group 224.1.2.3.
a. Select Switching > MVR > Advanced > MVR Group Membership.
A screen similar to the following displays.
Managed Switches
MVR
303