NETGEAR M4200 Software Administration Manual page 219

A screen similar to the following displays.
b. In the ACL Name list, select ipv6-acl.
c. Click Add.
A screen similar to the following displays.
d. In the Rule ID field, enter 2.
e. For Action, select the Permit radio button.
f. In the Protocol Type list, select TCP.
g. In the Source Prefix field, enter 2001:DB8:C0AB:AC11::.
h. In the Source Prefix Length field, enter 64.
i. In the Destination Prefix field, enter 2001:DB8:C0AB:AC13::.
j. In the Destination Prefix Length field, enter 64.
k. In the Destination L4 Port list, select telnet.
l. Click Apply.
4. Add Rule 3.
a. Select Security > ACL > Advanced > IPv6 Rules.
Managed Switches
ACLs
219