NETGEAR M4200 Software Administration Manual page 189

e. Click Apply to save VLAN 38.
4. Enable IP routing:
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. Under IP Configuration, make the following selections:
• For Routing Mode, select the Enable radio button.
• For IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP routing.
5. Create an ACL with ID 101.
a. Select Security > ACL > Advanced > IP ACL.
A screen similar to the following displays.
b. In the IP ACL Table, in the IP ACL ID field, enter 101.
c. Click Add.
6. Create an ACL with ID 102.
a. Select Security > ACL > Advanced > IP ACL.
Managed Switches
ACLs
189