Web Interface: Configure Sntp - NETGEAR M4200 Software Administration Manual

Web Interface: Configure SNTP

1. Configure the SNTP server.
a. Select System > Management >Time > SNTP Server Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the Server Type field, select IPV4.
• In the Address field, enter 208.14.208.19.
• In the Port field, enter 123.
• In the Priority field, enter 1.
• In the Version field, enter 4.
c. Click Add.
2. Configure SNTP globally.
a. Select System > Management > Time > SNTP Global Configuration.
A screen similar to the following displays.
Managed Switches
SNTP
396