NETGEAR M4200 Software Administration Manual page 568

A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/11 check box.
Now 1/0/11 appears in the Port field at the top.
c. Enter the following information:
• In the IP Address field, enter 192.168.5.1.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
4. Enable RIP on interface 1/0/10.
a. Select Routing >RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/10.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
5. Enable RIP on interface 1/0/11.
a. Select Routing > RIP > Advanced > Interface Configuration.
Managed Switches
PIM
568