Web Interface: Configure Dhcpv6 Prefix Delegation - NETGEAR M4200 Software Administration Manual

3. Enable DHCPv6 service on port 1/0/9.
(NETGEAR SWITCH) (Config)#interface 1/0/9
(NETGEAR SWITCH) (Interface 1/0/9)#routing
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 address 2001:1::1/64
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 enable
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 dhcp server pool1 preference 20
(NETGEAR SWITCH) (Interface 1/0/9)#exit
4. Show DHCPv6 binding.
(NETGEAR SWITCH) #show ipv6 dhcp binding
Client Address................................. FE80::200:FF:FE4D:AAD0
Client Interface............................... 1/0/9
Client DUID....................................
00:01:00:01:15:40:14:4f:00:00:00:4d:aa:d0
Identity Association ID........................ 5090000
Binding Prefix Address/Length.................. 2001:1::/64
Binding Prefix Type ........................... IA_PD
Binding Expiration (secs)...................... 4294967284
Binding Prefix Valid Lifetime (secs)........... infinite
Binding Prefix Preferred Lifetime (secs)....... infinite

Web Interface: Configure DHCPv6 Prefix Delegation

1. Enable IP routing globally.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Enable IPv6 unicast globally.
a. Select Routing > IPv6 > Basic > Global Configuration.
Managed Switches
DHCPv6 Server
475