b. Scroll down and select the interface 1/0/10 check box.
Now 1/0/10 appears in the Interface field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.3.2.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
3.
Configure 1/0/11 as a routing port and assign an IP address to it.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Port 1/0/11 check box.
Now 1/0/11 appears in the Port field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.5.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
4.
Enable RIP on interface 1/0/10.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface field, select 1/0/10.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
Managed Switches
PIM
589