Web Interface: Configure A Dhcp Server In Dynamic Mode - NETGEAR M4200 Software Administration Manual

Web Interface: Configure a DHCP Server in Dynamic Mode

1. Create VLAN 200.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. Under VLAN Configuration, in the VLAN ID field, enter 200.
c. Click Add.
2. Add port 1/0/1 to VLAN 200.
a. Select Switching > VLAN >Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID field, select 200.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 1 and 24 until U displays.
The U specifies that the egress packet is untagged for the port.
e. Click Apply.
3. Assign PVID to the VLAN 200.
a. Select Switching > VLAN> Advanced > Port PVID Configuration.
Managed Switches
DHCP Server
467