Configure Vlan Routing With The Vlan Routing Wizard - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports

Configure VLAN Routing With the VLAN Routing Wizard

The VLAN Routing Wizard creates a VLAN routing interface, configure the IP address and
subnet mask for the interface, and add selected ports or LAGs to the VLAN. With this wizard,
you can:
• Create a VLAN.
• Add selected ports to the newly created VLAN and remove selected ports from the
default VLAN.
• Optionally, you can create a LAG, add selected ports to a LAG, then add the LAG to the
newly created VLAN.
• Enable tagging on selected ports if the port is in another VLAN. Disable tagging if a
selected port does not exist in another VLAN.
• Exclude ports not selected from the VLAN.
• Enable routing on the VLAN using the IP address and subnet mask entered.

To configure VLAN routing using the VLAN routing wizard:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Routing > VLAN > VLAN Routing Wizard.
Access the Switch
Configuring Routing
207
on page 13.