Balancer Shaft Inspection - Honda Civic 2002-2003 Service Manual

•
•
•
Balancer Shaft Inspection
1. Seatthe balancer shaft by pushing it away from the
oil pump sprocket end of the oil pump.
2. Zero the dial indicator against the end of the
balancer shaft, then push the balancer shaft back
and forth and read the end play.
Balancer Shaft End Play:
Front Balancer Shaft:
Standard (New): 0.070-0.135 mm
(0.0028-0.0053 in.)
Service Limit: 0.15 mm (0.006 in.)
Rear Balancer Shaft:
Standard (New): 0.070-0.135 mm
(0.0028-0.0053 in.)
Service Limit: 0.15 mm (0.006 in.)
~\
~
3. Remove the baffle plate (A) and upper balancer
shaft holder (with bearings) IB), then remove the
front balancer shaft Ie) and rear balancer shaft ID).
___ - B
(conl'd)
8-11