Honda Civic 2002-2003 Service Manual page 135

Cylinder Head
Cylinder Head Installation (cont'd)
7. Apply engine oil to the bolt threads and under the
bolt heads of all the cylinder head bolts.
8. Tighten the cylinder head bolts in sequence to 39
Nom (4.0 kgf.m, 29Ibf.ft). Use a beam-type torque
wrench. When using a preset-type torque wrench,
be sure to tighten slowly and do not overtighten. If
a bolt makes any noise while you are torquing
it,
loosen the bolt and retighten it from the first step.
9. After torquing, tighten all cylinder head bolts in two
steps (90' per step). If you are using a new cylinder
head bolt, tighten the bolt an extra 90'.
6-40
10. Install the rocker arm assembly (see page 6-38).
11. Install the water bypass hose (A).
C
6x 1.0 mm
B
6x 1.0mm
12N·m
(1.2 kgf·m, 8.7Ibf·ftl
12 N·m (1.2 kgf·m, 8.7Ibf·ftl
12. Tighten the connecting pipe mounting bolt (8) and
brake booster vacuum line mounting bolts
(e),
then
install the harness holder (D) on the bracket.
13. Install the upper radiator hose (A) and heater hose
(8).
~g.
A
\