Bit Switch 5 Settings - Ricoh D093 Service Manual

005 Bit Switch 5 Settings

Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and
bit 0
Punch Type from the operation panel. The available types will depend on
the device and configured options. After enabling the function, the settings
will appear under:
"User Tools > Printer Features > System"
bit 1
DFU
If enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called
bit 2 the "GPS Filter".
Note: The main purpose of this bit switch is for troubleshooting the effects
of SDK applications on data.
[PS] PS
Criteria
Changes the number of PS criterion used by the PS interpreter to
bit 3
determine whether a job is PS data or not.
Pattern 3: Includes most PS commands.
Pattern 1: A small number of PS tags and headers
Increase
max
number
of the
stored
bit 4
jobs to
1000
jobs.
If enabled, changes the maximum number of jobs that can be stored on
the HDD (via Job Type settings) to 1000. The default is 100.
SM
Pattern3
Disable (100)
6-107
Main SP Modes
0 1
Disabled Enabled
Pattern1
Enable
(1000)
D093/D094