Operating In Ei Mode; Operating The Msd From The Ds - Agilent Technologies 5977B Series Operating Manual

4

Operating in EI Mode

Operating the MSD from the DS

The Agilent MassHunter GC/MS Acquisition software automates tasks such as
pumping down, monitoring settings, setting temperatures, tuning, and venting
the MSD. These tasks are described in this chapter. Additional information is
described in the manuals and online help supplied with the Agilent
MassHunter GC/MS Acquisition software.
The software and firmware are revised periodically. If the steps in these procedures do
C A U T I O N
not match your
manuals and online help supplied with the software for more information.
80
Agilent MassHunter GC/MS Acquisition software
, refer to the
5977B Series MSD Operating Manual
