Agilent Technologies 5977B Series Operating Manual page 99

Do not exceed 200 °C for the quadrupole or 350 °C for the source.
C A U T I O N
3 To send the new temperature parameters to the currently loaded tune file
4 Click Close to exit the dialog. If changes were made to any parameters the
5977B Series MSD Operating Manual
and download these parameters to the MSD, click Apply.
Save MS Tune File dialog displays. Click OK to save your changes to the same
file, or type a new file name and click OK. Click Cancel to discard the edit
made to any parameter.
Operating in EI Mode 4
99