Operating The Msd From The Gc Control Panel - Agilent Technologies 5977B Series Operating Manual

Operating the MSD from the GC control panel

The GC control panel on a 7890A+ or 7890B GC can show the actual
temperature and pressure of the MSD or initiate a task on the MSD without
using the Agilent MassHunter GC/MS Acquisition software. You can access
functions, such as venting and setting temperatures, right from the GC control
panel. Limited features are available from the GC control panel. The Agilent
MassHunter GC/MS Acquisition software is the full-featured controller for
most instrument control operations.
MSD designated key on the GC control panel
The
configuration parameters on the MSD. (See
with updated firmware, this key is labeled Aux Det # which can be substituted
for the
Figure 20
5977B Series MSD Operating Manual
key on the 7890B GC control panel allows access to control and
MS/Aux Det
key in the procedures that follow.
MS/Aux Det
7890B GC control panel
Operating in EI Mode
Figure 20.) For 7890A+ models
4
81