To Set Monitors for MSD Temperature and Vacuum Status
A monitor displays the current value of a single instrument parameter. They
can be added to the standard instrument control window. Monitors can be set
to change color if the actual parameter varies beyond a user-determined limit
from its setpoint.
Procedure
1 In Instrument Control view, select Edit Monitors from the Instrument menu to
Figure 26
2 In the Available Monitors column, select a monitor, and click Add to move the
3 Click OK. The new monitors will be stacked on top of each other in the lower
5977B Series MSD Operating Manual
display the Select Monitors dialog. (See
Select monitors dialog
selection to the Selected Monitors column. Repeat for additional monitors.
right corner of the Instrument Control window.
Operating in EI Mode
Figure
26.)
4
95