Agilent Technologies 5977B Series Operating Manual page 87

6 Confirm that BootP is set to OFF. If your LAN assigns IP addresses using a
7 To update the MSD IP address, Gateway IPA, and SubNet Mask enter the new
8 Click Submit to upload this net configuration to the MSD.
Figure 23
9 Click OK to close the dialog and wait for the prompt requesting to Manually
10 Use the MSD on/off switch to reboot the MSD SmartCard.
5977B Series MSD Operating Manual
BootP server, click ON and skip the next step.
values. Before clicking submit, you can recover the previous settings by
clicking Return to Main Menu and then returning here.

A dialog opens to confirm that the network configuration process has
started. (See Figure
IP address configuration started message
reboot of the MSD/SmartCard to activate the new Settings.
23.)
Operating in EI Mode 4
87