To Set The Operation Mode For The Optional Jetclean System - Agilent Technologies 5977B Series Operating Manual

4 Operating in EI Mode

To Set the Operation Mode for the Optional JetClean System

Procedure:
1 In Instrument Control view, click the MS Parameters icon.
2 In the Single Quadrupole MS Method Editor navigation panel, select the
3 From the Operation dropdown menu, select a mode.
Figure 33
For detailed information on the JetClean system see the JetClean Operating
manual.
106
JetClean tab. (See
Figure
Selecting the JetClean Operation mode
33.)
5977B Series MSD Operating Manual
