4
Operating in EI Mode
eModule Mini Display Readout
The eModule mini display, accessible when the analyzer door cover is open,
allows the operator to view the LAN configuration of the instrument including
its IP address, subnet mask, default gateway, and MAC address. This LAN
configuration can be changed using the GC control panel or the web user
interface (WUI) from a web browser.
Front Panel Instrument Status LED
Through the front panel instrument status LED, the operator can view the
current status of the instrument using color codes and LED on/off timing. (See
Table
Table 7
Instrument status
Ready
Acquiring data
Not ready
JetClean Acquire & Clean operation
JetClean Clean Only operation
Ready and not connected to DS
Start up (prior to FW load)
Fault
88
7.)
Front panel Instrument Status LED codes
LED code
Solid green
Blinking green (<2 sec)
Solid yellow
Blinking magenta
Solid magenta
Solid blue
Blinking red (<2 sec)
Solid red
5977B Series MSD Operating Manual