To Open The Msd Covers - Agilent Technologies 5977B Series Operating Manual

4 Operating in EI Mode

To Open the MSD Covers

If you need to open one of the MSD covers, follow these procedures.


To remove the analyzer window cover
Press down on the rounded area on the top of the window, tilt the window
slightly forward and lift it off the MSD. (See
Do not use excessive force or the plastic tabs that hold the cover to the mainframe will
C A U T I O N
break off.
Analyzer window cover
Handle
Analyzer cover
Figure 36 5977B MSD covers


Pull the handle on the side of the MSD to the left and down to release the
magnetic latch and open the cover. The cover is held in place by its hinges.
(See
Do not remove any other covers. Dangerous voltages are present under other covers.
WA R N I N G
112
Figure 36.)
Figure 36.)
5977B Series MSD Operating Manual
