2.7 SP5-019 PAPER SIZE SETTING
2.7.1 Paper Size Selection for the Paper Tray Unit, LCT, and By-pass
Feed
For the paper tray unit, LCT and by-pass feed, the paper size can be
selected with SP5-019 using the following procedure.
1. Enter SP mode as follows;
1) Press the "Clear Modes" key.
2) Enter "107" with the numeric keys.
3) Hold down the "Clear/Stop" key for more than 3 seconds.
NOTE: When SP mode is selected, "1" blinks in the 3rd digit of the copy
counter, the Auto Image Density indicator starts blinking, and the
reduce/enlarge indicator turns off.
2. Enter SP5-019 as follows
1) Enter "5" and press the "Enter" key.
2) Enter "019" and press the "Enter" key.
3. Press the
⇒
is selected.
3rd level (001~008
can be selected
with the
and
keys.
SP5-019-001
SP5-019-002
SP5-019-003
SP5-019-004
SP5-019-005
SP5-019-006
SP5-019-007
SP5-019-008
Example: In an A155 copier, to select the paper size for the LCT, select 3rd
level program 007.
⇒
•
NOTE:
SP5-019-001 must be set to "0" for LT version machines.
•
The 3rd level program number is blinking in the 1st digit of the
copy counter.
•
Depending on the 3rd level program number, the paper tray
indicator changes.
•
SP settings for each 3rd level program number are blinking in
the reduce/enlarge indicator.
*SPECIAL: See section 2.7.2 "Special Paper Size Selection for the 1st Tray".
A156/A160/A162
CÓPIA NÃO CONTROLADA
or
key until the required 3rd level program number
A153/A157/A161
A204/A208/A212
Paper
Paper
Tray
Size
Indicator
Selection
Indicator
—
—
—
—
3rd Tray
3
4th Tray
4
5th Tray
5
By-pass
Feed
SPECIAL*
1
—
—
4-48
CÓPIA NÃO CONTROLADA
A155/A159
A156/A160/A162
A206/A210
A207/A211/A214
Paper
Paper
Paper
Tray
Size
Tray
Selection
Indicator
—
—
—
—
3rd Tray
3
4th Tray
4
5th Tray
5
By-pass
Feed
LCT
T
*SPECIAL
1
Rev. 08/2001
Paper
Size
Selection
—
—
2nd Tray
2
3rd Tray
3
4th Tray
4
By-pass
Feed
LCT
T
SPECIAL*
1
—
—
FSM