Color Solid Pattern; Cmm Pattern; Running Mode - Konica Minolta bizhub C353 Service Manual

10. Service Mode
10.13.7

8 Color Solid Pattern

Functions • To produce an 8-color solid pattern.
Use • Used for checking color reproducibility and uneven density of each color.
Pattern
Setting/ • # of Print ("1" to 999)
Procedure • Select "SINGLE" (single copy) or MULTI (multi copy).
• Select FEET or "HYPER."
• Select "Gradation" or Resolution if HYPER has been selected.
• Type the density level (0 to "255").
10.13.8

CMM pattern

Functions • To produce a CMM (Color Management Module) pattern.
Use • Used to check color difference depending on the places where output is made.
Pattern
Setting/ • # of Print is always "1".
Procedure • Select "Error diffusion", Gradation, or Resolution.
• Select an angle from among "0 degrees", 90 degrees, 180 degrees, and 270
degrees.
10.13.9

Running Mode

Functions • To test the printing operation in running mode.
Use • Use to check the printing operation in running mode from each paper source.
Setting/ 1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Test Mode] → [Running Mode].
Procedure
3. Select the paper size (Tray 1, bypass only).
4. Select the paper type.
5. Press the Start key to start the running mode.
6. Pressing the Stop key will stop operation.
430
Field Service Ver. 3.0 Jan. 2008
SINGLE
HYPER
Gradation
Density: 255
A02EF3C514DA
Error diffusion
270 degrees
A02EF3C515DA