Distance Adjustment - GRAPHTEC FC2250 Series User Manual

Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
If the value you nput s exceedngly large (1.5 tmes or greater) or very small (0.5 tmes or less), or f the angle of tlt
wth respect to the orgnal axs tlt s 45° or greater, the followng prompt s dsplayed. In ths case, please re-nput
the value.
FORCE

DISTANCE ADJUSTMENT

ERROR. SET AGAIN!
SPEED
(5) If 3-pont or 4-pont adjustment has been selected, the menu for adjustng the dstance between ponts 1 and 3 wll
be dsplayed. Make the settngs n the same way as for the dstance between ponts 1 and 2.
(6) When the dstances between all the ponts have been adjusted, the followng menu for settng the axs adjustment
orgn s dsplayed. (Ths menu s not dsplayed when 4-pont readng has been selected.)
FORCE
AXIS ORIGIN POINT
X=
SPEED
Use the [ ] [
to the poston for settng the axs adjustment orgn, and then press the [ENTER] key. If 2-axs adjustment has been
performed prevously, the pen carrage wll move automatcally to the prevously set reference pont. In ths case, use
the [ ] [ ] [
(7) When all the adjustments have been completed, the plotter returns to Ready status.
4-20
OFFSET
QUALITY
OFFSET
0 Y= 0
QUALITY
] [ ] [ ] keys to move the pen carrage (the tp of the tool or pen selected by the current settng)
] [ ] keys to make any adjustments requred.