Setting The High Movement Speed - GRAPHTEC FC2250 Series User Manual

Setting the High Movement Speed

Ths settng determnes the hgh speed settng when one of the [
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE
OPTION1
SPEED
(3) Press the [F4] key (OPTION2) to dsplay the menu shown below.
FORCE
POSITION OPT
MOVE SPD
SPEED
(4) Press the [F3] key (POSITION OPT) to dsplay the menu shown below.
FORCE
STEP
LOW SPEED
SPEED
(5) Press the [F3] key (HI SPEED) to dsplay the hgh-speed settng screen.
FORCE
HI SPEED
SPEED
Use the [ ] or [ ] key to change the numerc value and then press the [ENTER] key to confirm your selections.
To cancel your selectons, press the [NEXT] key.
Setting range: 1 to 30 (cm/s) [Default value: 20]
(6) Press the [PAUSE] key to cancel PAUSE mode.
This setting is retained in the plotter's internal memory even while the plotter is turned off.
OFFSET
OPTION2
QUALITY
OFFSET
TEST
QUALITY
OFFSET
HI SPEED
LCD•
QUALITY
OFFSET
20 cm/s
QUALITY
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
] [ ] [ ] [ ] keys s held down.
5-27