5.4 Moving the Pen Carriage to the Upper Right Position
Ths functon allows you to move the pen carrage to the upper rght (VIEW) poston.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE
MARK
BUFFER CLR.
SPEED
(3) Press the [F4] key (VIEW) to move the pen carrage to the upper rght poston. The followng menu appears.
FORCE
MARK
BUFFER CLR.
SPEED
(4) Press the [F4] key (HOME) to cancel the VIEW status and return the pen carrage to the HOME poston (lower left
poston).
If you used the [
dsplayed at the [F4] poston), the VIEW status s cancelled (VIEW s dsplayed at the [F4] poston)
(5) Press the [PAUSE] key to cancel PAUSE mode.
While using this function, keep your hands out of the vicinity of the Y bar and pen carriage. The Y bar and the pen
carriage start moving immediately when the [F4] key is pressed.
•
Pressing the [
] key and the [ENTER] key simultaneously moves the pen carriage to the upper right (VIEW) position.
•
Pressing the [
] key and the [ENTER] key simultaneously returns the pen carriage to the HOME position.
OFFSET
TOOL U/D
VIEW
QUALITY
OFFSET
TOOL U/D
HOME
QUALITY
] [
] [
] [
] keys to move the pen carrage whle the plotter s n the VIEW status (HOME s
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
5-5