GRAPHTEC FC2250 Series User Manual page 32

Chapter 3 PREPARATIONS FOR CUTTING/PLOTTING
3.3 Mounting the Tools
When you are facng the pen carrage, the holder at the left s tool holder 1 and the holder at the rght tool
holder 2.
Always mount the cutter pen in tool holder 2.
Even when mounting a cutter pen together with a different type of pen, always mount the cutter pen in tool holder 2.
Take care not to touch the cutter blade during the mounting operation.
(1) Loosen the tool holder screw and mount the pen.
At ths tme, fully nsert the pen untl t reaches the pen stopper.
(2) After mountng the pen, tghten the screw.
3-4
Tool holder 2
Tool holder 1
Registration mark sensor Example showing tools mounted