Features - GRAPHTEC FC2250 Series User Manual

1.3 Features

•
T he FC2250 series plotters provide a sharply-defined cutting edge.
•
The cuttng force can be freely selected n a 40-step range (max. 9.8 N[1 kgf]).
The maxmum cuttng speed s 400 mm/s.
The hgh acceleraton rate ncreases the overall cuttng speed.
•
T he FC2250 can cut not only marking film, but also thick paper, sandblast rubber and other media. Therefore,
sgnboards, artwork for producton purposes and other sgnage can be easly produced.
•
The standard 2-Mbyte buffer RAM unt greatly reduces the load on the host computer.
•
The FC2250 seres uses a dgtal servo drve system for hghly precse cuttng results at hgh speed.
•
Cutter blade replacement s straghtforward.
Chapter 1 PRODUCT SUMMARY
1-3