5.23 Setting the Pen Carriage Movement Speed
Ths settng determnes how far and how fast the pen carrage moves when the [
used to move t. When one of the [
the specified distance. If the key is held down, the pen carriage moves slowly, but then moves more quickly
after moving the specified length (distance).
•
When the LCD parameter in the menu shown below is marked with a black dot [
displayed on the LCD when the [
FORCE
STEP
LOW SPEED
SPEED
•
Pressing the [NEXT] key while using the [
low speed and high speed. Use this function for more accurate positioning of the pen carriage.
Setting the Step Movement Distance
Ths settng determnes the dstance the tool head moves each tme one of the keys s pressed. The settng
dstance s an approxmate measure of the dstance actually moved.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE
OPTION1
SPEED
(3) Press the [F4] key (OPTION2) to dsplay the menu shown below.
FORCE
POSITION OPT
MOVE SPD
SPEED
(4) Press the [F3] key (POSITION OPT) to dsplay the menu shown below.
FORCE
STEP
LOW SPEED
SPEED
(5) Press the [F1] key (STEP) to dsplay the step movement settng screen.
FORCE
STEP
SPEED
Use the [
] or [
To cancel your selecton, press the [NEXT] key.
Setting range: 5, 10, 25, 50, 100 (µm) [Default value: 5]
(6) Press the [PAUSE] key to cancel PAUSE mode.
This setting is retained in the plotter's internal memory even while the plotter is turned off.
] [
] [
] [
] [
] [
OFFSET
HI SPEED
LCD•
QUALITY
OFFSET
OPTION2
QUALITY
OFFSET
TEST
QUALITY
OFFSET
HI SPEED
LCD•
QUALITY
OFFSET
5 um
QUALITY
] key to change the numerc value, and then press the [ENTER] key to confirm your selection.
] [
] keys s pressed ntally, the pen carrage moves only
] keys are used. Press the [F4] key to activate or deactivate this function.
] [
] [
] [
] keys to move the pen carriage toggles the speed between
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
] [
] [
] [
•
], the coordinates during movement are
] keys are
5-25