Mark Type - GRAPHTEC FC2250 Series User Manual

4.3 Setting the Registration Mark Pattern
Your plotter can read five registration mark patterns: 1, 2, 3, Mirror 1 and Mirror 2. If pattern 3, Mirror 1 or
Mrror 2 has been selected, ths functon allows you to set the spacng between the regstraton mark lne
segments.
Registration mark pattern 1
Registration mark pattern Mirror 1
: Cutout area
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE
MARK
BUFFER CLR.
SPEED
(3) Press the [F1] key (MARK) to dsplay the regstraton mark functons selecton menu.
FORCE
MODE
TYPE OTHER SETUPS
SPEED
(4) Press the [F1] key (TYPE) to dsplay the menu for settng the regstraton mark pattern.
FORCE
1

MARK TYPE

•2
SPEED
The currently selected settng s ndcated by a black dot [
To read regstraton mark pattern 1, press the [F1] key (1).
To read regstraton mark pattern 2, press the [F2] key (2).
To read regstraton mark pattern 3, press the [F3] key (3).
To read regstraton mark pattern mrror 1 or mrror 2, press the [F1] key (1) or the [F2] key (2) together wth the [F4]
key (MIRROR).
When the dsplayed settng s satsfactory, press the [ENTER] key to confirm your selection.
If registration mark pattern 3 has been selected, the mirror mode setting (see Section 5.16, "Setting the Mirror
Mode" will be set to off.
Registration mark pattern 2
Registration mark pattern Mirror 2
OFFSET
TOOL U/D
VIEW
QUALITY
OFFSET
DIST ADJ
QUALITY
OFFSET
3
MIRROR
QUALITY
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
: Cutout area
•
].
Registration mark pattern 3
4-5