Oce Arizona 440 GT User Manual page 48

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Print Job Control Module
Components of the Print Job Control Module
Job Control Panels
Component
1) Job and Print-
er Status
2) Printer Mes-
sages Panel
3) Pause/Re-
sume and the
Ink System Sta-
tus
4) Command
Toolbar left
5) Command
Toolbar right
6) Active Jobs
List
7) Job Place-
ment Preview
8) Inactive Jobs
9) Job Informa-
tion and Param-
eters panel.
10) Interface
Tabs
11) Software
Version Number
and Image Up-
load Progress
Job Control Components Explained
1) Job and Printer Status Panel
48 Chapter 4 - How to Navigate the User Interface
Function
Displays the status and progress of print jobs.
Displays the last four lines of the log - click in this area
to see more of the log.
To the right is the print job Pause/Resume button and
the Ink System Status icon - click to view an ink status
report.
Displays icons for actions related to the print jobs and
control of the printer.
Displays icons for ink temperature, lamp control, start
print jobs, and print a nozzle check.
Displays a list of all Active print jobs.
Displays the selected print job with a preview that
shows the placement of that job on the printer.
Displays a list of all Inactive print jobs.
This panel shows the parameters of the currently se-
lected print job and also allows changes to the param-
eters associated with that job.
Use these tabs to select the different modules of the
printer user interface.
Displays the current installed version of the printer
software.
The image upload progress panel indicates the name
of a print job that is currently uploading to the printer.
This panel is not always visible and appears only
when an image is loading to the printer. It is located
below the software version number when it is active.