Oce Arizona 440 GT User Manual page 84

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
How to Install the ONYX Printer Driver
[48] Configure Printer Port
7.
Enter the Network name of the printer (as displayed in Step 3) and make
sure <Port 9100> is selected for the port.
[49] Configure Printer Host Name
NOTE
If you have more than one printer, each printer must have a unique
network name. The network name can be changed in the Settings module
of the printer User Interface.
Check Configuration
Click on Test to verify that the computer and printer are in communication.
If the Test was successful, a message indicates a Valid IP address. If no
valid IP is found, check the network name of the printer is correct and port
9100 was selected. Run the Test again.
84 Chapter 5 - How to Operate Your Océ Arizona Printer