Varnish Quickstart - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

Varnish QuickStart

Introduction
This section shows you how to print a simple job with a varnish Printer
Flood Fill. The following section provides more detail about printing with
varnish.
Purpose
This exercise will help you get familiar with some of the basic concepts
involved when you print images with varnish.
Printing varnish requires an ONYX media profile (media model) that was
made with a CMYKSS ink configuration with spot colors defined. All print
modes are supported except the High Definition print mode.
Before you begin
Import an ONYX media profile that was made using a CMYKSS ink
configuration with 2 spots defined.
NOTE
Sample Media models for varnish are available for download from the
Customer Support section of the DGS website: http://dgs.oce.com/. These
media models are documented later in this chapter (see How to Use
Media Models to Print With White Ink or Varnish).
Chapter 9 - How to Work With White Ink and Varnish
Varnish QuickStart
197