How To Print White Ink - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
How to Print White Ink Jobs
Example 2: White ink to be printed with printer generated drop level 4 (24
pl) data
B. Printing a Single Layer Print Job with White Ink
For print jobs that do not use Quality-Layered mode:
NOTE
When you print white ink with print modes other than Quality-Layered, it
is not recommended to print white ink in the same area of an image as
CMYK inks. The white ink does not mix well with the other ink colors.
1. Create spot data in a design application. (See section "How to Create
Spot Data")
2. Open the job in ONYX workflow software using any print mode other
than Quality-Layered with an ONYX media profile that supports
printing of white spot ink.(See section "White Ink and Varnish Media
Profiles")
3. Submit the print job (i.e., process/rip the job).
4. Send the job to the printer and then print it.
196 Chapter 9 - How to Work With White Ink and Varnish