Chapter 7 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
media is positioned with a high resolution media encoder. This ensures
accurate and high quality prints on various core media.
Roll Media Hardware
Component
1) Dual Foot Pedal
Switches
2) Media Drive Cou-
plers
3) Accessory Holder
4) Take-up Media
Shaft
5) Supply Media Shaft
6) Media Access Door
7) Media Cut Guide
8) Media Tension Bar
9) Vacuum Platen
10) Gimbal
11) Capstan
Function
The dual foot pedal switches areused to control
media feed in both forward and reverse direc-
tions. Function varies depending on whether
media is loaded or unloaded.
The couplers keep the media shafts in place and
engaged to the drive motor. In the open (hori-
zontal) position they allow the media shafts to
be removed.
Convenient storage for tape, cutting blade and
5mm hex key tool.
Supports the take-up media roll.
Supports the supply media roll.
Provides access to the supply media for media
loading.
Allows easy cutting of the media.
Provides tension to ensure steady movement of
the media.
Holds the roll media in place while an image is
printed.
Maintains alignment of the media on the take-
up shaft.
Determines the location of the media for print-
ing and provides steady movement of the me-
dia.
NOTE
The capstan must always be clean and
smooth. Clean any kind of debris that
might collect on it, especially UV inks
(See RMO Maintenance section for
cleaning instructions).
Chapter 7 - How to Operate the Roll Media Option
Roll Media Option Hardware
115