Oce Arizona 440 GT User Manual page 26

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Océ Arizona 400 Series Safety Labels
Description
Caution: For Continued Protection Against
Fire And Electric Shock
Replace Only With Same Type and Ratings
of Fuse
Caution: Disconnect Power Before Changing
Fuse.
Refer to the section "How to Power the Print-
er On and Off"
Electrical Shock Hazard Equipment
Powered by two power cords.
Turn off power switch or remove both pow-
er cords before servicing
Refer to the section "How to Power the Print-
er On and Off"
Warning: High Leakage Current Earth Con‐
nection Essential Before Connecting Supply
Refer to the Arizona Printer Site Preparation
Guide.
Danger: High Voltage
Warning that High Voltage is present behind
marked panel.
Warning: Isolate Power Before Servicing.
Refer to the section "How to Power the Print-
er On and Off" and sub-section "How to Lock
Out the Power Switch".
Warning: Line Voltage Always Present
Warning that High Voltage is present behind
marked panel at all times, even when ma-
chine is turned off
26 Chapter 3 - Safety Information
Label
[3] Disconnect Power
[4] Electrical Shock Hazard
[5] High Leakage Current
[6] High Voltage
[7] Isolate Power
[8] Line Voltage Present
4