Oce Arizona 440 GT User Manual page 64

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Settings Module
Network Connection Settings
NOTE
Typically, DHCP is used to automatically obtain network settings. If "Use
DHCP" is selected, the only thing you might want to change is the network
name of the printer. The settings are displayed to troubleshoot possible
network connection problems. One situation that would require changes
is if your network does not use DHCP to automatically obtain network
settings. In this case network settings have to be entered manually. If you
don't know how to do this, bring in a network consultant to determine
what the setting must be for the network (alternately, you can purchase a
DHCP router for your network that will automatically supply the network
settings).
• Network Name
• Printer Description
• Network Adapter Name
• MAC Address
• Network Status
• Use DHCP
• IP Address
• Subnet Mask
• Default Gateway
NOTE
A network name for the printer cannot consist of numeric characters only
- it must be a mix of alpha-numeric characters.
If the Printer name is changed, the printer must be restarted for the
change to take effect.
If any settings require a printer restart, a reminder will be displayed when
that settings is selected.
64 Chapter 4 - How to Navigate the User Interface