Printhead Maintenance - How To Evaluate A Nozzle Check - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

Printhead Maintenance - How to Evaluate a Nozzle Check

Procedure
1.
The Magenta section of the Nozzle Check print example shown in the
figure below indicates that multiple nozzles are out.
NOTE
This is an extreme example to illustrate the problem. In most cases you
will likely see only two or three nozzles out.
[128] Nozzle Check Print Magenta
2.
In the above example, Magenta printhead 6 has nozzles that are not firing
properly in both Package A and B . It also show a new nozzle print after the
printhead was cleaned.
The illustration below shows the printhead order and the relationship
between the printhead location and the labels on the nozzle check print.
This helps to identify the printhead where the nozzle outs are located.
Printhead Maintenance - How to Evaluate a Nozzle Check
Chapter 12 - Printer Maintenance 233