How To Power Off; Printer - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

How to Power Off

4. During the boot-up procedure, the printer software is automatically
started. The software displays a splash screen followed by a screen that
requests you to raise and then lower the carriage guard.
5.
Lift the carriage guard slightly and then replace it. At the control station
click on Continue to finish the startup procedure.
[46] AC Power Switch
6.
The splash screen will show initialization messages and then the Print Job
Control module screen appears. The initialization is complete when the top
left panel of the display shows "Ready". Your printer is now ready for use.
How to Power Off
IMPORTANT
After powering the printer On, leave it running continuously, even when
at idle. Failure to leave the printer powered on may result in ink draining
out of the ink reservoirs. It may also result in damage to the printheads.
Leave the printer powered On at all times, unless service to electrical
components is required.
NOTE
The printer is designed to be left powered ON at all times as only minimal
power is consumed when the printer is idle.
78 Chapter 5 - How to Operate Your Océ Arizona Printer