How To Remove Stains (Coffee, Tea, Soda Pop, Etc.) - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
[154] Remove lint, dust, paper particles and debris

How to Remove Stains (coffee, tea, soda pop, etc.)

Supplies Needed: Rubber gloves, soap, hot water, and lint-free cloth.
Procedure
1.
Put on nitrile gloves
2.
Mix a cleaning solution that is 50:1 hot water to soap.
NOTE
Use a mild detergent such as Ivory - avoid soaps that have dies,
moisturizing oils, or perfumes as they may damage the capstan. Read the
label! Our R&D Lab has tested only Ivory Detergent. If you are uncertain
about a detergent try it out in a 50:1 solution on a small area at the end of
the capstan.
3. Wet the cloth in the cleaning solution and wring out excess liquid. Scrub
the surface of the capstan using the cleaning cloth.
4.
Allow adequate time for the capstan to dry.
NOTE
If scrubbing action leaves debris on the surface, wait for the surface to dry
completely, then follow the procedure listed above for "Removing Solid
Debris".
How to Remove Stains (coffee, tea, soda pop, etc.)
Chapter 12 - Printer Maintenance 275