Operator Interface Hardware; Chapter 4 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

Operator Interface Hardware

Operator Interface Hardware
Introduction
The Operator interacts with printer components to print, maintain, and
monitor the state of the printer. This section identifies and explains the
functions of the hardware.
[30] Printer Hardware
Operator Interface Components
Hardware Interface Components
Component
1) Main Power
Switch
2) Emergency Stops
3) Carriage Guard
4) Ink Purge Valves
42 Chapter 4 - How to Navigate the User Interface
Function
Turns the printer On and Off.
Emergency stop buttons can shut down all motion
and hazardous systems. There are three E-stops,
one on the podium stand, and one on each end of
the gantry.
Protects the Operator from exposure to UV light
and stops all motion if dislodged by an obstacle.
Allow the operator to isolate specific printheads to
purge ink as part of cleaning the nozzles.
4