Oce Arizona 440 GT User Manual page 191

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
If you want to print first surface (e.g. opaque media) the bottom and
middle layers can be configured to be white flood layers and the top layer
to be a CMYK data layer. If you want to print second surface (e.g.,
transparent media viewed from side that does not have ink on it), then the
bottom layer should be a CMYK data layer and the middle and top layers
white flood layers.
5.
Put the printer back online in ONYX RIP-Queue and send the job to the
printer.
6. Print the job.
Chapter 9 - How to Work With White Ink and Varnish
White Ink QuickStart
191