Chapter 7 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Roll Media Manager
[60] Roll Media Manager
Roll Media Manager Menu
Roll Media Manager Icons
Icon
Load
Unload
Initialize
Print Side
Normal Move /
Slow Move
120 Chapter 7 - How to Operate the Roll Media Option
Function
Allows the operator to load new media. Set the foot
pedal switches to the Load state.
Prepares the RMO to allow the operator to cut the ex-
isting media, remove it, and replace it with a new roll.
Sets up tension on the loaded media and prepares the
RMO to print on that media.
Operator can select either Print Side In or Print Side
Out. Print Side In allows you to print on the back side
of the media. The default setting is Print Side Out.
Normal Move is the default state. When you click on
this icon in the top right corner, it changes to Slow
Move. Use Slow Move when you want to advance or
rewind media and stop it at a more precise position. It
causes the dual foot pedal switches to move the me-
dia more slowly.