Chapter 4 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Print Job Control Module
• Production-Squared mode (Arizona 480) can be used to produce a wide
variety of printing output as along as the printhead nozzles are firing
properly. Production Squared Mode has a faster print speed than
Production Smooth Mode but is more sensitive to nozzle outs. As with
high-speed modes on any inkjet printer, there is insufficient nozzle
redundancy to produce flawless images all the time on all media. As a
result, it may be necessary to print some output in Production Smooth
Mode or Quality Mode.
Note: When Production Smooth or Squared mode is used, there is a
pull-down menu in the Print Job module that allows you to select either
Production-Smooth or Production-Layered (the menu allows you to
change how it was configured in your ONYX software).
• Quality provides excellent image quality and is suitable for a wide range
of image types and looks good with most media.
• Quality-Density doubles the density for backlit media. For flatbed media
that may warp or move slightly from the heat of the lamps, this mode
provides better image registration than Overprint because it is done in
one gantry pass.
• Quality-Layered allows you to place multiple layers in one print job. It is
most useful when printing with White Ink (see Chapter 9 How to Work
with White Ink and Varnish). You must configure any extra layers in the
ONYX software.
Note: When Quality Density or Layered mode is used, there is a pull-
down menu in the Print Job module that allows you to select either
Quality-Layered or Quality-Density (the menu allows you to change how
it was configured in your ONYX software).
• Fine Art is used when details are important and speed is not an issue. It
is a good choice if your image contains text or fine details and also solid
colors.
• High Definition provides higher resolution with more detail than Fine
Art, especially with very small text or fine lines.
Note: The Varnish option is not available with this print mode. Varnish
is available with all other print modes, if you ordered the option with
your printer.
10) Printer Interface Module Tabs
These tabs allow you to switch between different functional modules of
the printer. Click on a tab to display the screen associated with each of the
modules available.
11) Software Version Number and Image Upload Progress
Displays the version of the currently installed printer software.
56 Chapter 4 - How to Navigate the User Interface