How To Remove Uncured Ink On The - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
How to Remove Uncured Ink on the Capstan
NOTE
It may be difficult to tell whether or not all the ink has left the surface.
Continue to wet and wipe the capstan surface until the cloth does not
show any sign of ink color.
[158] Wipe up remainder of ink
4.
Allow adequate time for capstan to dry.
NOTE
If the scrubbing action leaves fibers from the cloth on the surface, wait for
the surface to dry completely, then follow the procedure listed above for
Removing Solid Debris.
When the capstan is kept clean and its rubber surface free of blemishes or
defects you will be ensured of accurate media transport and optimal print
quality. If its surface is badly damaged the capstan will need to be
replaced.
278 Chapter 12 - Printer Maintenance