Chapter 4 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Component
5) Printer Status
Beacon
6) UV Lamps
7) Vacuum Gauge
8) Print Button
9) Maintenance Sta-
tion
10) Vacuum Zone
Control Handles
11) Ink Bay
12) Ink Filters
(13) Coolant Bottle
(14) Vacuum Table
Foot Switch
(15) Bulkhead ac-
cess door
Function
Indicates printer status. See Chapter 3 for details.
UV light is used to cure the ink.
Displays the strength of the table vacuum system.
If it reads less than 10"Hg, check for vacuum leaks.
Starts the current print job.
Designated area for cleaning the printheads and
the underside of the carriage.
Five vacuum zone control handles determine if
vacuum zones 2 to 6 on the printer table are active
when the vacuum pump is switched on. Zone 1 is
always on so it has no control handle. The zones
on the Océ Arizona 400 Series XT model are differ-
ent (see Chapter 6 for details).
There are two ink bays: the Primary bay contains
CMYK ink and the coolant bottle; the Secondary
bay holds the additional Cyan or Magenta, and
White ink or Varnish.
Ink filters are behind a door under the ink bags.
The filters remove unwanted particulate matter
from the ink.
Provides coolant to maintain correct temperature
of the ink in the printheads.
Toggles the pump to turn the table vacuum on/off.
Vacuum must be on prior to starting a print.
Provides access to the connections required to
plug in the podium components such as LCD mon-
itor, mouse, and E-stop. Also is a storage location
for the coolant supply bottle.
Chapter 4 - How to Navigate the User Interface
Operator Interface Hardware
43