Oce Arizona 440 GT User Manual page 255

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
IMPORTANT
A clogged ink filter can result in damage to your printer's ink system.
Particulate matter buildup in the ink can cause problems that will require
a service call. Be sure to change all ink filters every 12 months to avoid
such problems.
Procedure
1. Open the sliding maintenance station door to disable the ink pumps.
2. Close all of the ink purge valves (they are located on the top of the
carriage).
3.
Disengage the ink bag for the color of filter you will replace. To do this
press the release tab on the left side of the quick-release ink bag coupler
and then pull it out to disconnect the ink bag.
[141] Remove Ink bag coupler
4.
Open the ink filter enclosure cover by pushing on the top center to release
and then allow the cover to fold down to provide access to the filters.
How to Change Ink Filters - How to Change an Ink Filter
Chapter 12 - Printer Maintenance 255