How To Print On Roll Media - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
[74] Roll media manager
4.
Enter the Media width for the roll media that you have loaded.
NOTE
If the media width entered is less than 1067 mm (3.5 ft) the standard
nozzle check will not fit across the media. In this case, if the Nozzle Check
icon is selected from the Print Job Control command toolbar, the narrow
version of the nozzle check (Nozzle Check Narrow) is automatically added
to the print queue.
Nozzle Check print: 1067 x 107.5 (3.5 x 0.35 ft)
Nozzle Check Narrow: 886.5 x 214.7 (2.9 x 0.70 ft)
5.
Check that the rest of the media parameters displayed match the particular
media you loaded.
6.
You can create a new media or edit an existing one by changing the
parameter values and then saving them under a new media name. When
you create a new media it takes the current values as default and
automatically creates a unique media name based on the existing name.
NOTE
Any changed parameter in the dialog window will be applied to the next
roll media print job, even if the change was not saved. This allows
temporary changes to the parameters without the need to save that
media.
Chapter 7 - How to Operate the Roll Media Option

How to Print on Roll Media

137