Roll Media Option Maintenance; Rmo Maintenance Guidelines - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

Roll Media Option Maintenance

Roll Media Option Maintenance

RMO Maintenance Guidelines

Introduction
The Océ Arizona 400 Series operator is responsible for the regular
maintenance of the printer and, if it is installed, the roll media option.
When the RMO unit is kept clean and free of blemishes and defects, you
will be ensured of accurate media transport and optimal print quality. This
section provides information about what is required for proper RMO
maintenance and cleaning.
NOTE
Any time there is any foreign matter or debris on the platen or the
capstan it must be removed immediately. Any spilled UV ink must be
removed immediately, before it can cure from exposure to light.
RMO Maintenance
The following table provides our recommended maintenance activities.
This is a minimum requirement and frequency will depend on
environmental conditions and operator work habits. How to clean the
capstan is explained in detail in the next section.
Maintenance Action
Clean the platen
Clean the capstan
Clean the media load-
ing bay
272 Chapter 12 - Printer Maintenance
Contaminant
Ink
Glue (release liner)
Silicon (release liner)
Paper dust
Coffee, tea, lemonade, milk, etc.
Ink (cured, uncured)
Glue (release liner)
Silicon (release liner - e.g. Avery control tag
180)
Dust
Ink