Oce Arizona 440 GT User Manual page 248

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Fill the Coolant Reservoir
Illustration
[136] Coolant Bottle
Procedure
1.
Remove the coolant tube from the coolant bottle lid.
2.
Remove the coolant bottle from the ink bay.
3.
Remove the coolant bottle lid.
4. Get the coolant fluid container that shipped with the printer (usually
located behind the door to the left of the coolant bottle in the Primary Ink
Bay).
5.
Fill the coolant bottle.
6.
Attach the lid to coolant bottle and return it to the Primary ink bay.
7.
Store the coolant fluid until it is needed again.
248 Chapter 12 - Printer Maintenance